Accueil> Blog> Brief Discussion on Cable Safety Grade of Cabling Specification

Brief Discussion on Cable Safety Grade of Cabling Specification

May 19, 2023
Brief Discussion on Cable Safety Grade of Cabling Specification The cabling industry is strictly regulated in terms of transmission performance and security. The security of cabling is of utmost importance. Standards bodies and industry organizations around the world have prepared comprehensive documentation for this purpose.

One of the most recognized authorities for cabling security is the US Underwriters Laboratories (UL), a non-profit organization dedicated to establishing and maintaining safety standards for multiple industries. UL provides a large number of quality inspection services for the cabling industry. Its services include:

Include UL listings - Verify cabling and related hardware safety levels.

UL Inspection—Inspects the transmission performance and safety level of the wiring according to the performance specifications specified in the TIA/EIA wiring standard; and periodically checks through quality assurance monitoring and factory surprise inspections.

UL Communication Wiring UL divides the wiring used by voice and data systems into "communications cabling and cabling," abbreviated CM. This category provides a variety of security levels for specific applications to test the quality of cable jackets, as detailed below: CMP: filled level communication cables, this is the highest cable safety rating, it has perfect flame retardant capabilities, The smoke and toxins emitted are very low. According to the definition of UL, a bundle of CMP cables must extinguish itself within less than 5 meters of the combustion diffusion under forced fan-intensive combustion conditions. The CMP cable uses Teflo-based chemicals to prevent the combustion from spreading and to minimize the emission of smoke and toxins. This adds a lot of cost compared to lower UL grade cables. CMP grade cables are used to vent air back into the building where the cable is laid. In the event of a fire, the building will not be full of smoke or dangerous toxins emitted by the cables. The U.S. is widely used in this kind of air return network, China Wire and Cable Network. Com but less used in other parts of the world. CMP-rated cables must undergo a rigorous combustion test: UL 910 - "Flame Propagation and Smoke Density Value Test" CMR: Trunk level communication cable. This is the second-ranked cable. It has perfect flame-retardant capabilities, but it does not test for emitted aerosol toxins. In addition to CMP and cables, CMR cables and all other communication cables use halide-based chemicals such as chlorine to prevent combustion diffusion. By definition, a bundle of CMR cables must self-extinguish within less than 5 meters of the combustion spread under forced fan combustion conditions. CMR cable jackets are generally made of a type of PVC that emits chlorine gas in the combustion chamber. Chlorine depletes the oxygen in the air and extinguishes the flame. CMR grade cables are widely used in mainline applications where the ventilation system is physically separated from the wiring system. This is very common in Asia and Australia. CMR grade cables must be subjected to intensive flame test: UL1666 - "Test of cable flame propagation height to vertical installation in the cable" CM/CMG: General purpose communication wiring. This is common in the horizontal alignment of buildings and they are usually divided into smaller bundles than CMR grade cables. The CM/CMG grade cable uses a halide-based chemistry for timelines. By definition, in a small bundle of cables, the CM/CMG cable must extinguish itself within less than 5 meters of the combustion spread. The flame did not use a fan to force combustion. CM/CMG grade cable jackets are usually made of some type of PVC and emit chlorine in the combustion chamber. CM/CMG grade cables are commonly used in horizontal cabling in the United Kingdom, Asia, and Australia. The CM/CMG grade cable must pass the CSA FT-4 Vertical Burn Test CMX: Residential Communication Wiring. This type of cable is limited to other small applications where there is a very small number of residential or telecommunication cables in use. These applications typically use only one cable. CMX grade tools cannot be used for bundled cable applications. CMX grade cables must pass the UL VW1 combustion test Low Smoke Zero Halogen (LSZH): Another safety class used in the cabling industry is the Low Smoke Zero Halogen (LSZH) cable. This safety level is divided by ISO/IEC standards and is widely used in Europe. The LSZH grade, like the UL CMP grade, tests the flame retardant ability and emitted gas. As the name implies, the burning LSZH will not emit halide gas, and the emitted smoke is very low. The LSZH grade cable can be used for copper and fiber optic communications cables, and its structure is similar to that of UL grade cables.

Nous contacter

Author:

Mr. Sumwai

Phone/WhatsApp:

+8613450606052

Produits populaires
You may also like
Related Categories

Envoyer à ce fournisseur

Sujet:
E-mail :
message:

Your message must be betwwen 20-8000 characters

NOUS CONTACTER

To: Dong guan Sum Wai Electronic Co,. Ltd.

Recommended Keywords

Copyright © 2024 Dong guan Sum Wai Electronic Co,. Ltd.Tous droits réservés.

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

envoyer